Estimation of driving mechanisms for oil reservoir using Material Balance (MBAL Software) “A Case Study of Libyan Oil Field

Madi Naser (1) , Omar Ibrahim Azouza (2) , Faraj Meftah Abousedrah (3)
(1) , Libya ,
(2) , Libya ,
(3) , Libya

Abstract

Material Balance (MBAL Software) is a software used for efficient reservoir development and helps the engineer better define reservoir drive mechanisms and hydrocarbon volumes. Natural forces in the reservoir that displace hydrocarbons out of the reservoir into the reservoir bore and up to surface. This paper estimates and compares of driving mechanisms using dynamic simulation in MBAL software and predictive material balance method after history matching of both of this model. Results from this paper shows functionality of MBAL in terms of history matching and performance prediction. The objective of this paper is to estimate water influx with identifying water influx model parameter and to estimate reservoir drive mechanism for (8) eight Libyan oil reservoirs. The simulator results show the reservoir pressure history curve is matching to the stimulation curve, this gives a good indication of the input data that has been entered to the model. The driving mechanism for all those reservoirs it comes from three natural forces, which are fluid expansion, PV compressibility, and water influx.

Full text article

Generated from XML file

References

Ahmed T. (2000) Reservoir engineering handbook, Houston (TX), Gulf.

Havlena, D., and odeh, A. S.,(1963): ''Balance as an Equation of a Straight Line", Trans, AlME, Part 1: 228 I-H96; Part 2: 231 I 815.

Fetkovich, M. J, (1971): "A Simplified Approach To Water Influx Calculations- Finite Aquifer Systems," JPT, PP. 814-828

Mohammed et al., (2017): Reservoir Performance Prediction Using Mbal Software: A Case Study., University of Missan College of Engineering Petroleum Engineering Department.

Tracy, G. (1955). Simplified form of the MBE. Trans.AIME,204,243–246

Sylvester, Okotie , and Onyekonwu M.O. "Software for Reservoir Performance Prediction." Paper presented at the SPE Nigeria Annual International Conference and Exhibition, Lagos, Nigeria, August 2015.

Van Everdingen, A. F. and Hurst, W. (1949). The Application of Laplace transform to flow problems in reservoirs. Trans. AIME, Vol. 186, 305-324

Carter, R.D. and Tracy, G.W. (1960) An Improved Method for Calculating Water Influx. American Invitational Mathematics Examination, 219, 415-417.

Fetkovich, M. J. (1971). A Simplified approach to water influx calculations-finite aquifer systems. JPT, 814-828.

Tarek Ahmed, Reservoir Engineering Handbook, Linacre House, Jordan Hill, Oxford OX2 8DP, UK, 2006, Third Edition.

Frank Jahn et al, Hydrocarbon Exploration and Production Handbook, Linacre House, Jordan Hill, Oxford OX2 8DP, UK, 2006, 2 ed Edition.

Authors

Madi Naser
m.naser@eng.misuratau.edu.ly (Primary Contact)
Omar Ibrahim Azouza
Faraj Meftah Abousedrah
Naser, M., Azouza, O. I. ., & Abousedrah, F. M. . (2021). Estimation of driving mechanisms for oil reservoir using Material Balance (MBAL Software) “A Case Study of Libyan Oil Field. Journal of Pure & Applied Sciences, 20(2), 101–111. https://doi.org/10.51984/jopas.v20i2.1227

Article Details

No Related Submission Found