Utilization of cellulose extracted from olive kernels (OK) and olive pomace (OP) to enhance drilling fluid properties in terms of filtration, viscosity and gel strength
Main Article Content
Abstract
This study explores the effects of cellulose derived from olive kernels (OK) and olive pomace (OP) on the properties of drilling fluids. The analysis revealed that both OK and OP cellulose exhibit similar density values across identical concentrations, indicating consistent density properties under the tested conditions. In terms of plastic viscosity (P.V.), OP cellulose demonstrated a slightly higher value of 10.4 cp compared to 10 cp for OK cellulose at a concentration of 0.1%, suggesting that both may be nearing a plasticity threshold where cellulose particle aggregation reduces thickening efficiency. Apparent viscosity (A.V.) peaked at 16.5 for OK and 15 for OP at a 0.1% concentration, illustrating distinct shear-thinning behaviours where viscosity decreased with increased shear rates at higher concentrations. Further, yield strength was found to be concentration-dependent, with OK cellulose peaking at 0.05% and OP cellulose at 0.1%. Filtration efficiency was notably improved by the addition of natural cellulose, with the highest filtration results observed at concentrations of 0.4% and 0.25%, achieving a value of 11.5 for both OK and OP cellulose. This suggests that increasing cellulose concentration can positively impact filtration control. The consistent performance of OP cellulose across various concentrations highlights its stability in enhancing filtration properties. Overall, the differences in cellulose behaviour between OK and OP are likely due to their unique physical properties, influencing their performance in drilling fluids.
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
References
Wu, P., Zhong, C., Li, Z., Zhang, Z., Wang, Z., Huang, W. (2021) Oil-Based Drilling Fluid Plugging Method for Strengthening Wellbore Stability of Shale Gas Geofluids
Abdideh, M., Mafakher, A. (2021) Wellbore Stability Analysis in Oil and Gas Drilling by Mechanical, Chemical and Thermal Coupling (Case Study in the South of Iran) Geotechnical and Geological Engineering 39, 3115-3131
Sudharsan, J., Khare, S., K. (2023) Shale swelling inhibition by nanoparticle additives in drilling fluids – A comprehensive review of nanoparticle induced oil and gas wellbore stability 2ND INTERNATIONAL CONFERENCE & EXPOSITION ON MECHANICAL, MATERIAL, AND MANUFACTURING TECHNOLOGY (ICE3MT 2022)
Ruqeishi, M., S., A., Salmi, Y., A., Mohiuddin, T. (2018) Nanoparticles as Drilling Fluids RheologicalProperties Modifiers 1, 1-7
Huaike, L., Tie, G., Lei, G., Jiansheng, L. (2019) High Performance Water-based Drilling Fluids—A High Efficiency Muds Achieving Superior Shale Stability While Drilling Deepwater Well with HPHT in South China Sea Science Journal of Energy Engineering
Kevin, N., M., Mahmud, H. (2019) Optimization of nano-silica in enhancing the properties of synthetic based drilling fluids for tight gas reservoir conditions IOP Conference Series: Materials Science and Engineering 495
Baoping, L., Xutian, H., Ke, K. (2021) Achievements and Developing Suggestions of Sinopec’s Drilling Technologies in Arctic Sea 49, 1-10
Mady, A., Mahmoud, O., Dahab, A. (2020) Nanoparticle-based drilling fluids as promising solutions to enhance drilling performance in Egyptian oil and gas fields 1, 24-38
Chen, S., Shi, Y., Yang, X., Xie, K., Cai, J. (2019) Design and Evaluation of a Surfactant–Mixed Metal Hydroxide-Based Drilling Fluid for Maintaining Wellbore Stability in Coal Measure Strata Energies
Al-Hasnawi, A., A., Faraj, A., Salih, A. (2024) Enhancing Drilling Efficiency and Reducing Vibration Induced Failures with Mud Lubricants Iraqi Journal of Oil and Gas Research (IJOGR)
Turgeon, N., Pagé, M., Robillard, J., Goulet, V., Bahloul, A., Brochot, C., Saidi, M., N., Dumont-Leblond, N., Duchaine, C. (2023) Filtration performance, fit test and side effects of respiratory personal protective equipment following decontamination: Observations for user safety and comfort PLOS ONE 18
Xu, B., Meng, Z., Liu, W., Luo, X., Chen, Y. (2023) Improving Drilling Efficiency and Safety Based on Hydraulic Mechanical Specific Energy in the Framework of Economic Model Predictive Control SPE Journal
Alkalbani, A., M., Chala, G. (2024) A Comprehensive Review of Nanotechnology Applications in Oil and Gas Well Drilling Operations Energies
Everhard, I., L., Willis, S., Villalobos, M., J., Clapper, D., Salem, H., A. (2014) Reduced Drilling Days and Low Friction Factors Hallmark Eagle Ford Water-Based Fluid Performance
Lin, J., Collins, N., Smith, K., Veeningen, D., Smith, S., , (2018) AADE-18-FTCE-113 Improving Drilling Fluid Preparation with High-Shear Mixing in Liquid Mud Plants
Alkalbani, A., M., Chala, G. (2024) A Comprehensive Review of Nanotechnology Applications in Oil and Gas Well Drilling Operations Energies
Everhard, I., L., Willis, S., Villalobos, M., J., Clapper, D., Salem, H., A. (2014) Reduced Drilling Days and Low Friction Factors Hallmark Eagle Ford Water-Based Fluid Performance
Lin, J., Collins, N., Smith, K., Veeningen, D., Smith, S., , (2018) AADE-18-FTCE-113 Improving Drilling Fluid Preparation with High-Shear Mixing in Liquid Mud Plants
Zhou, S., Song, J., Xu, M., Xu, P., You, F., Pu, L. (2023) Rheological and filtration properties of water-based drilling fluids as influenced by cellulose nanomaterials: different aspect ratios and modified groups Cellulose 30, 3667-3683
Farag, R., M., Salem, A., El-Midany, A., El-mofty, S. (2021) Bentonite Suspension Filtration and its Electro-Kinetics in the Presence of Additives Tenside Surfactants Detergents 58, 121-126
Alhajabdalla, M., Mahmoud, H., Nasser, M., Hussein, I., Ahmed, R., Karami, H. (2021) Application of Response Surface Methodology and Box–Behnken Design for the Optimization of the Stability of Fibrous Dispersion Used in Drilling and Completion Operations ACS Omega 6, 2513-2525
Abdikamalova, A., Kalilaev, M., Khojanazarova, S., Khalilov, M., Bukharov, S. (2023) Polymer structure-forming agents for control the characteristics of drilling fluids E3S Web of Conferences
Mostafa, M., M., A., Kwon, S., Oh, H., Braiki, A., M., A., shkeili, F., A., Shahat, A., E. (2022) Maximizing Marginal Fields Profitability Via Drilling Multi-Lateral Wells to Reduce Well Count and Well Cost: Dual Lateral Well with Single ESP and Smart Lower Completion Day 3 Wed, November 02, 2022
Joseph, V., Nwosu, A. (2023) Navigating Hole Cleaning and Drilling Challenges in High-Angled Wells with D-Max Enhanced Water-Based Mud System: A Comparative Experimental Analysis International Journal for Research in Applied Science and Engineering Technology
Chemical composition of olive pits and its potential for energy use" by E. Kantarlı, Renewable and Sustainable Energy Reviews, Volume 16, Issue 1, 2012.
Kobilov, N., Khamidov, B., Shukurov, A., Kodirov, S., Juraev, K. (2023) New composition of chemicals and heavy drilling fluids for drilling oil and gas wells E3S Web of Conferences
Growcock, F. (2003) Enhanced Wellbore Stabilization and Reservoir Productivity with Aphron Drilling Fluid Technology, Quarterly Report: October - December 2003
Амонов, М., Р. (2015) РАЗРАБОТКА КОМПОЗИЦИОННЫХ БУРОВЫХ РАСТВОРОВ И ИЗУЧЕНИЕ ИХ ФИЗИКО-ХИМИЧЕСКИХ И ТЕХНОЛОГИЧЕСКИХ СВОЙСТВ , 52-55