The Effects of Pits Size and Shape on Fatigue Crack Initiation
Article Sidebar
-
AVPP, Crack, Corrosion, Fatigue, Oxide-film
Abstract
Generate and monitor the growth of corrosion pits on the surface of 316L stainless steel using the scanning droplet cell technique and assess the effects of varies factors such as pits size, pits shape, flow rate, and applied stress on pit initiation and growth. Configure of a test system to measure the pit and short fatigue crack growth behaviour, to investigate each stage of the corrosion fatigue damage process occurring at the material surface and compare this with the modified film surface using alternating voltage passivation process (AVPP). Understand the effects of corrosion on cracking behaviour during the different stages of fatigue crack growth.
Full text article
Authors
Copyright (c) 2021 Journal of Pure & Applied Sciences
This work is licensed under a Creative Commons Attribution 4.0 International License.
In a brief statement, the rights relate to the publication and distribution of research published in the journal of the University of Sebha where authors who have published their articles in the journal of the university of Sebha should how they can use or distribute their articles. They reserve all their rights to the published works, such as (but not limited to) the following rights:
- Copyright and other property rights related to the article, such as patent rights.
- Research published in the journal of the University of Sebha and used in its future works, including lectures and books, the right to reproduce articles for their own purposes, and the right to self-archive their articles.
- The right to enter a separate article, or for a non-exclusive distribution of their article with an acknowledgment of its initial publication in the journal of Sebha University.
Privacy Statement The names and e-mail addresses entered on the Sabha University Journal site will be used for the aforementioned purposes only and for which they were used.