\Best Design and Improve the Functionality of the Buildings (Southern Region - Libya)

Muhammad Al-Sharif (1) , Bashir Al-Nass (2) , Manssour Bin Miskeen (1) , Muhammad Al-Mahdi (1)
(1) Department of Architecture Engineering and Urban Planning, Faculty of Engineering Science and Technology, Sabha University, Sabha, Libya,
(2) Department of Civil Engineering, Faculty of Engineering ,Azzaitounaa University, Tarhuna, Libya

Abstract

Due to the change in the effect of the cyclical climate during the seasons, the design of the building requires extensive knowledge of the methods of protection from external climatic fluctuations, especially in areas with a hot and dry climate, which necessitates the adoption of thermal design processes employed during the stages of the design process to improve the thermal design performance level and raise it. The future will be a building that is efficient in terms of its thermal performance and achieves the thermal comfort of its occupants. The problem of research emerged in the lack of knowledge in the standards of thermal comfort in buildings and the impact of climate factors in the form of architectural design of buildings and the failure of most of the designers of this type of building. The aim of this paper is to introduce a method to classify thermal design treatments used in hot, dry climates. In this paper, a number of conclusions have been reached, including knowledge of the appropriate orientation of the building block, the place and orientation of the openings, the shape of the building, its mass, and the appropriate insulation materials in the dry hot climate.

Full text article

Generated from XML file

References

[1] فائزة الغناي (2010), مباني مدينة مرزق الفديمة (بحث غير منشور)

[2] ايوبكر الخازمي و فوزي عقيل (2019). الاستدامة في العمارة الصحراوية, دراسة وتحليل المعالجات المعمارية المستخدمة لتقليل الكسب الحراري في المناطق الصحراوية-دراسة حالة مدينة غدامس, المؤتمر الهندسي الثاني لنقابة المهن الهندسية بالزاوية.

[3] علاء الدين ابوزيد (2019), "السمات المشتركة لعمارة الصحراء الكبري والمدخل البيئي للتصميم في المناطق الحارة الجافة", مجلة جامعة الازهر, العدد 14(33).

[4] تقرير اللجنة الاقتصادية الاجتماعية (اسكوا)Elscwa (2018) , .استدامة الطاقة في قطاع المباني في المنطقة العربية, Elscwa limited .

[5] مريم بن شيخة (2019), دراسة ومقارنة بين كفاءة الاداء الحراري لروزنة المساكن الفردي العتيق والحديث, دراسة حالة-مدينة بسكرة, اطروحة دكتوراة في الهندسة المعمارية, جامعة بسكرة. بحث غير منشور.

[6] احمد فكري, احمد احمد, محمد ابو الليل و محمد كريم (2017),"العناصر المعمارية للتحكم بالتهوية الطبيعية", مجلة جامعة الأزهر 12(44).

[7] محمد عبد الله عبد الله (2016), الانشاء المعماري, عالم الكتب, القاهرة.

[8] Al-Ajwad, A., Bilfageh, O., Miskeen, M. B., & Sharief, M.W. (2020). Sustainable Architecture Using Solar Cells in Libya. Journal of Pure & Applied Sciences, 19(5), 147-158.

Authors

Muhammad Al-Sharif
[email protected] (Primary Contact)
Bashir Al-Nass
Manssour Bin Miskeen
Muhammad Al-Mahdi
Al-Sharif, M., Al-Nass, B., Bin Miskeen, M., & Al-Mahdi, M. (2021). \Best Design and Improve the Functionality of the Buildings (Southern Region - Libya). Journal of Pure & Applied Sciences , 20(4), 63-71. https://doi.org/10.51984/jopas.v20i4.1675

Article Details

How to Cite

Al-Sharif, M., Al-Nass, B., Bin Miskeen, M., & Al-Mahdi, M. (2021). \Best Design and Improve the Functionality of the Buildings (Southern Region - Libya). Journal of Pure & Applied Sciences , 20(4), 63-71. https://doi.org/10.51984/jopas.v20i4.1675

Similar Articles

You may also start an advanced similarity search for this article.

No Related Submission Found