تحسين كفاءة الطاقة في المباني السكنية في ليبيا: اختيار العزل الأمثل ودمج تقنيات الطاقة المتجددة

. Mohamed A, Al Habaibeh A, Abdo H, Elabar S. Towards exporting renewable energy from MENA region to Europe: An investigation into domestic energy use and householders’ energy behaviour in Libya. Applied Energy. 2015; 146:247-62.

. Fathi N. Thermodynamic Analysis and Optimization Procedure for Domestic Solar Water Heating System. Am J Energy Power Eng. 2015; 2:92-99.

. GECOL. General Electricity Company of Libya Report, Libya; 2010. Available from: www.gecol.ly.

. Karshman H, Kaawan A. Achievement progress in the Great Man-Made River project. Engineering. 1985; 5:48-51.

. Jwili R, Akilla S. Analysis of an Air-Conditioning System Assisted by a Parabolic Through Solar Collector Mounted in a Building in Benghazi-Libya. University of Benghazi. 2013;6-9.

. Taylor B, Imbabi M. The application of dynamic insulation in buildings. Renew Energy. 1998;377-82.

. Zaki G, Hassan K. Thermal performance of composite building components with periodic solar insulation and ambient temperature. Solar Wind Technol. 1986; 3:103-9.

. Kossecka E, Kosny J. Influence of insulation configuration on heating and cooling loads in continuously used building. Energy Build. 2002; 34:321-31.

. Al-Sanea S, Zedan M. Effect of insulation location on initial transient thermal response of building walls. Therm Environ Build Sci. 2001; 24:275-300.

. Hassan A. Optimizing insulation thickness for building using life-cycle cost. Appl Energy. 1999; 63:115-24.

. Dombaycı A. Degree-days maps of Turkey for various base temperatures. Energy. 2009; 34:1807-12.

. Bolatturk A. Optimum insulation thickness for building walls with respect to cooling and heating degree-hours in the warmest zone of Turkey. Build Environ. 2008; 43:1055-64.

.Comakli K, Yuksel B. Environmental impact of thermal insulation thickness in buildings. Appl Therm Eng. 2004; 24:933-40.

. Dombayci O. The environmental impact of optimum insulation thickness for external walls of buildings. Build Environ. 2007; 42:3855-9.

. Mahlia T, Taufiq B, Masjuki H. Correlation between thermal conductivity and the thickness of selected insulation materials for building wall. Energy Build. 2007; 39:182-7.

. Bolatturk A. Determination of optimum insulation thickness for building walls with respect to various fuels and climate zones in Turkey. Appl Therm Eng. 2006; 26:1301-9.

. Comakli K, Yuksel B. Optimum insulation thickness of external walls for energy saving. Appl Therm Eng. 2003; 23:473-9.

. Duffie J, Beckman W. Solar Engineering of Thermal Processes. 2nd ed. New York: Wiley; 1991.

. ASHRAE Handbook. Heating, Ventilation, and Air Conditioning Applications. Atlanta: ASHRAE Inc.; 1991.

. Naouel D. A Study on Optimum insulation thickness in Walls and Energy Savings in Tunisian Buildings Based on Analytical Calculation of Cooling and Heating Transmission Loads. Appl Energy. 2011; 88:156-64.

. Kalogirou S. Solar thermal collectors and application. Appl Energy. 2004; 30:231-95. [22] . K. Murat and K. Kamola, “Energy saving potential in the residential sector of Uzbekistan,” Energy Journal, vol. 32, pp. 1319–1325, 2007.

. Saidur R. Energy consumption, energy saving, and emission analysis in Malaysian office buildings. Energy Policy. 2009; 37:4104-13