Removal of Methyl Orange Dye from Aqueous Solutions using Amberlite LA-2 as an Extractant

Aisha Al-abbasi (1) , Marrow Alammarwy , Safa Abdulljaoad
(1) Associated Professor, Libya

Abstract

The removal of methyl orange dye, MO, has been accomplished through the use of liquid-liquid extraction from aqueous solutions using Amberlite LA-2 as an extractant. UV-Vis spectroscopy was used to determine the concentration of dye in an aqueous solution. The effect of pH was studied at a specific concentration of dye and Amberlite at contact time. The effect of the initial dye concentration (20-80 ppm), and Amberlite concentration (0.011-0.044 M) on the removal rates of the dye at different contact times (15- 60 min), and temperatures of 20-40 OC have been investigated. The experimental results of extraction were used to calculate the distribution coefficient (KD), loading capacity (Z), and extraction efficiency (E%). The removal of the dye decreases with the increase in the amount of Amberlite. Moreover, there was an increase in the E % with increasing temperature. The best pH was determined to be 5.5. The maximum extraction value of about (97.65%) was obtained.

Full text article

Generated from XML file

Authors

Aisha Al-abbasi
ais.alabbasi@sebhau.edu.ly (Primary Contact)
Marrow Alammarwy
Safa Abdulljaoad
Removal of Methyl Orange Dye from Aqueous Solutions using Amberlite LA-2 as an Extractant . (2022). Journal of Pure & Applied Sciences , 21(2), 55-60. https://doi.org/10.51984/jopas.v21i2.2055

Article Details

How to Cite

Removal of Methyl Orange Dye from Aqueous Solutions using Amberlite LA-2 as an Extractant . (2022). Journal of Pure & Applied Sciences , 21(2), 55-60. https://doi.org/10.51984/jopas.v21i2.2055

Similar Articles

You may also start an advanced similarity search for this article.

No Related Submission Found