الخواص الميكانيكية للأسمنت البورتلاندي المقوى بالجسيمات القصيرة والطويلة المصنوعة من معادن مختلفة

[1]-Kosmatka, S. H., Kerkhoff, B., &Panarese, W. C. (2011). "Design and control of concrete mixtures". Portland cement Association.

[2]-Andrzej M. Brandt((5331"Cement-Based Composites: Materials, Mechanical Properties and Performance", 2nd edition, UK.

[3]-Michael S. Mamlouk, John P. Zaniewski, (2011). "Materials for Civil and Construction Engineers", 3rd edition, Prentice Hall.

[4]-A.M. Neville, (2012), "Properties of concrete", Trans-Atlantic Publications, Inc. 5th edition.

[5]-H. Du, K.H. Tan, "Concrete with recycled glass as fine aggregates", ACI Mater. Journal. 111 (2014) 47-58.

[6]-H. Du, K.H. Tan, "Properties of high volume glass powder concrete", Cement and Concrete Composites 75 (2017) 22-29.

[7]-T. Perraki, E. Kontori, S. Tsivilis, G. Kakali, "The effect of zeolite on the properties and hydration of blended cements", Cem. Concr. Compos. 32 (2) (2010) 128–133.

[8]-D. Nagrockiene ̇ et al. "Properties of concrete modified with mineral additives" Construction and Building Materials 135 (2017) 37–42.

[9]-Alizadeh R, Shekarchi M, Chini M, Ghods P, Hoseini M, Montazer S. "Study on electric arc furnace slag properties to be used as aggregates in concrete". CANMET/ACI international conference on recent advances in concrete technology, Bucharest, Romania; 2003.

[10]-Ali N. Alzaed, "The effect of iron fillings on concrete compression and tensile strength", International Journal of Recent Development in Engineering and Technology. (ISSN 2347 -6435 (Online)) Volume 3, Issue 4, October 2014.

[11]-Shehdeh Ghannam, "Experimental study of concrete made with granite and iron powders as partial replacement of sand", Department of Civil Engineering, Zarqa University, Zarqa, Jordan, Sustainable Materials andTechnologies 9 (2016).

[12]-P. Kittl, E. Galleguillos, G. Diaz, "Properties of compacted copper fibre reinforced cement composite", The International Journal of Cement Composites and Lightweight Concrete, 7 (1985) Number 3.

[13]-T. D. Tonyan, L. J. Gibson, "Strengthening Of Cement Foams", Journal Of Materials Science 27 (1992) 6379-6386.

[14]-Abdussalam A. M. Gebril, "The effect of Gabraun`s water on corrosion of low carbon steel compared with other types of water in south of Libya". Sebha University Journal of Researchand Applied Sciences. 15 (1) (2015).

[15]-James F. Shackelford, W. Alexander, "Materials Science and Engineering Handbook" Third Ed.: CRC Press, Boca Raton, 2001.

[16]-William D. Callister, Jr, "Materials Science and Engineering, an introduction", 1997, fourth edition, John Wiley & sons, Inc., USA.

[17]-M.F. Ashby et. al. " Metal Foams: A Design Guide", Butterworth-Heinemann, Boston, MA, 2000.

[18]-T. Abdulla, A. Yerokhin, R. Goodall, "Effect of Plasma Electrolytic Oxidation coating on the specific strength of open-cell aluminum foams", Materials and Design. 32, (2011) 3742–3749.