Evaluation of Corrosivity and Scaling Potential of Groundwater using Saturation Indices in Idri Municipality, Wadi Al Shatti

Omar (1) , Binyehmed (1) , Alshareef (2)
(1) Environmental sciences department, Faculty of Environment and Natural Resources, Wadi Alshatti University, Libya,
(2) Petroleum and Environmental Technology Department, Faculty of Environment and Natural Resources, Wadi Alshatti University, Libya

Abstract

Corrosivity and scaling tendency of water is an etiology of economic and health concerns in the water supply systems. The corrosivity of water and its ability to form calcium carbonate scales are economic and health concerns in water supply systems. The aim of this study is to verify the stability of water in the distribution systems of drinking water and irrigation water in some groundwater wells in Idri municipality, Wadi Al Shati. Physiochemical tests were conducted for 12 well samples in the study area, including water temperature, pH, total dissolved salts (TDS), calcium hardness and total alkalinity. Water stability was determined using the Langelier Saturation Index (LSI) and the Ryznar Stability Index (RSI). The results of the physicochemical analysis showed that the mean of pH, temperature, TDS, calcium hardness, and total alkalinity were 7.05±0.39, 19.87±4.11 C0, 832.64±104.34 mg/L, 62.58±49.79 mg/L, and 11.03±2.20 mg/L, respectively. The results also showed that the majority of the samples are highly corrosive, as the LSI index ranged between -0.87 to -2.9, where the Mansoura M2 well was less corrosive, and the Al-Hatiya H2 well was the highest corrosive according to the LSI index. In addition, the findings showcased that the RSI values ranged between 9.7 to 12, in general, these values are considered high based on RSI index, which means that this water is very aggressive. Furthermore, the wells that showed high corrosivity were soft water with a low calcium level, which means that they are unable to form scales which protect metals' surface from corrosion attack. On the other hand, the results exhibited that wells such as T3 (medium hardness), M1 (very hard) and M2 (medium hardness) were less corrosive according to Langelier, and therefore the corrosivity would be lower due to their simple ability to form scales.

Full text article

Generated from XML file

References

1- الحياني، عبد الستار جبير. 2009. تقييم المياه الجوفية لبعض آبار قرية الخراجية في محافظة الأنبار. مجلة جامعة الأنبار للعلوم الصرفة. المجلد الثالث. العدد الثاني.

2- أبو زخار، أحمد علي وبالحاج، مها محمود. 2014. استعمال بعض المؤشرات للتنبؤ بحدوث الترسبات القشرية أو الأكل للمنظومات المائية بشمال غرب ليبيا الم جلة الليبية للعلوم الزراعية. 19(2-1) 1-

[3]-Gupta, N.; Nafees S.M.; Jain, M.K. & Kalpana, S. 2011. Assessment of Groundwater Quality of Outer Skirts of Kota City with Reference to its Potential of Scale Formation and Corrosivity. E-Journal of Chemistry. 8(3), 1330-1338.

[4]-Zietz, B.; Keve Kordes, S.; and Dunkelberg, H. 2001. Lead contamination in tap water of households with children in Lower Saxony, Germany. The Science of the Total Environment. (275): 19-26.

[5]-Kim, E. J.; Huggins Dan, J. E. H.; Braam, J.; and Koshowski, S. 2011. Effect of pH on the concentrations of lead and trace contaminants in drinking water: A combined batch, pipe loop and sentinel home study. Water Research. (45): 2763-2774.

[6]-Boulay, N. & Edwards, M. 2001. Role of temperature, chlorine and organic matter in copper corrosion by-product release in soft water. Water Research. 35(3): 683-690.

[7]-Till, H.; Merkel, H.J.U.G.; Werner, W.; Dahlke, T.; Reicherter, S.; Buechel, G. & Siegfried, H. E. 2002. Copper corrosion by-product release in long-term stagnation experiments. Water Research. (36): 1547-1555.

[8]-Tammie, L.; Gerke, K.G.S.; Maynard, J. B. 2010. Speciation and distribution of vanadium in drinking water iron pipe corrosion by-products. Science of the Total Environment. (408): 5845-5853.[9]-Kavar, P. and Tofugu, S. C. 2009. A health risk assessment for exposure to trace metals via drinking water ingestion pathway. Int. J. Heeg. Environ. Health. (212): 216-225

[10]-Mender, E.J. et al., 2003. Overcoming constraints to the implementation of water demand management in southern Africa. Physics and Chemistry of the Earth, Parts A/B/C, 28(27): 761-778.

[11]-Li, W.; Liu, S.; Zhao, J.; Liu, R.; Chen, Q.; Qiang Z. and Qu, J.2011. Development of systems for detection, early warning and control of pipeline leakage in drinking water distribution: A case study. Journal of Environmental Sciences. 23(11): 1816-1822.

[12]-Taghipour, H.; Shakerkhatibi, M.; Pour Akbar, M.; Bavasi, M. 2012. Corrosion and scaling potential in drinking water distribution system of Tabriz, northwestern Iran. Health promotion perspectives. 2(1):103 -111.

[13]-Kawamura S. 2000 Integrated designs and operation of water treatment facilities, 2nd Ed. New York: John Wily and Sons Inc.

[14]-Salvato, J. A.; Nemerov, N. L., Agard, F.J. 2009. Environmental Engineering. Fifth edition. New Jerky: John Wiley and Sons Inc.

[15]-Nawrocki, J.; Stanislaw, Swietlik, U. R.; Olejnik, A.; Sroka, M.J. 2010.Corrosion in a distribution system: Steady water and its composition. Water Research.; 44: 1863-1872.

[16]-Ilanga, J.; Deng, A.; Xie, R.; Gomez, M.; Huj, Zhang J.; Ong, C. N.; Adin, A. 2013 Impact of flow rate on corrosion of cast iron and quality of remineralizer seawater reverse osmosis (SWRO) membrane product water. Desalination. 2013; 322: 76-83.

[17]-Melida's, P.; Sennoside, M.; Mandisa, A.; Bouzoukis, K. 2006. Corrosion control by using indirect methods. Desalination. 2007; 213: 152-158.

[18]-Amodei, A.; Asghari, H.; Fallah, H.; Miri, S.; Momeni, H.2017. Evaluating corrosion and scaling potential of drinking water supplies in Juber, North of Iran. Iranian Journal of Health Sciences.5(2): 11-18.

[19]-[19] Whiters, A. 2005. Options for recoronation, deintercalation and disinfection for desalination plants. Desalination. 179 (1-3): 11-24.

[20]-Peng, C. Y.; Kor shin, G. V.; Valentine, R.; Hill, R. L.; Friedman, A. S. 2010. Characterization of elemental and structural composition of corrosion scales and deposits formed in drinking water distribution systems. Water Research. 44: 4570-80.

[21]-World Health Organization. 2008. Drinking Water Quality Guidelines, vol.1, Geneva.

[22]-Atasoy, A. D.; Yesinia, M. I. 2010. Effect of high sulfate concentration on the corrosivity: a case study from groundwater in Harran plain, Turkey. Environ Monit Assess. 166 (1-4): 595-607

]23[- شيبة، فاطمة ناجم؛ بعزوم، عبد القادر بعزوم؛ المثنانين، عبد السلام محمد؛ محمد، عائشة رمضان. 2019.

بعض الآثار البيئية للتمية بمنطقة وادي الشاطئ، جنوب غرب ليبيا. مجلة علوم البحار والتقنيات البيئية. المجلد (5)، العدد (1). 27- 43.

]24[- عون، أحمد محمد محمد. 2002. الماء من المصدر إلى المكب. الهيئة العامة للبيئة. طيلس، ليبيا.

]25[- أبوته، مسعود فرج. 2009. تجارب في الكيمياء التحليلية. الطبعة الأولى. دار الكتب الوطنية. بنغازي. ليبيا.

[26]-Momeni, H.; Nikuman, H.; Salmani, E. R. 2018. Corrosion and scaling potential of drinking water resources of Sirayan County, Iran. Iranian Journal of Health Sciences.6(3). 36-44.

]27[- العلواني، الامين 2014. فسم علوم البيئة، كلية التقنية، جامعة سبها

]28[- خليل، محمد أحمد السيدر. 2003. إعداد المياه للشرب والاستخدام المنزلي. الطبعة الاولي، المكتبة الأكاديمية، القاهرة، مصر.

]29[- العروسي، حسين. 1997. الماء والحياة. الطبعة الأولي، مكتبة المعارف الحديثة، الإسكندرية، مصر،

Authors

Omar
Binyehmed
[email protected] (Primary Contact)
Alshareef
Abd Alhadi , O. A., Mohmed, F., & Mohamed, I. (2023). Evaluation of Corrosivity and Scaling Potential of Groundwater using Saturation Indices in Idri Municipality, Wadi Al Shatti. Journal of Pure & Applied Sciences , 22(3), 60-66. https://doi.org/10.51984/jopas.v22i3.2736

Article Details

How to Cite

Abd Alhadi , O. A., Mohmed, F., & Mohamed, I. (2023). Evaluation of Corrosivity and Scaling Potential of Groundwater using Saturation Indices in Idri Municipality, Wadi Al Shatti. Journal of Pure & Applied Sciences , 22(3), 60-66. https://doi.org/10.51984/jopas.v22i3.2736

Similar Articles

You may also start an advanced similarity search for this article.